|
Base Options with R-A-M Kits
Priced as shown above |
|
|
|
RAM-BAR ($12.50)
RAM-BAR-CH ($31.00)
U-bolt base for 1/2" to 1-1/4" handlebars. Available in Black or Chrome (CH)
|
|
|
|
|
RAM-BAR2 ($20.50)
Double U-bolt base for 3/4" to 1" handlebars. For rough/offroad use.
Backordered until approx 8/16/2010
|
|
|
|
|
RAM-HB1 ($12.00)
RAM-HB1-CH ($31.50)
Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. One R-A-M ball cast in place, 2nd ball available. See RAM-HB2 also. Black or Chrome (CH). Also includes SAE hardware for Harley
|
|
|
|
|
RAM-HB-BALL ($11.00)
Add-on ball for RAM-HB1 mount (requires existing RAM-HB1)
|
|
|
|
|
RAM-HB2 ($14.00)
RAM-HB2-CH ($38.00)
Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. Configured with 2 R-A-M balls for use with 2 arms and devices. Black or chrome (-CH), also includes SAE bolts for Harley.
|
|
|
|
|
RAM-STEM ($15.00)
Steering stem base for bikes with hollow steering stems 12mm to 28mm diameter
|
|
|
|
|
RAM-RC-C ($20.00)
Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.
Photo is not accurate. This product sits on top of the existing reservoir lid, it does not replace the lid.
|
|
|
|
|
RAM-RC-S ($21.00)
Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.
|
|
|
|
|
RAM-BC8 ($10.00)
RAM ball to replace handlebar M8 clamp bolt
|
|
|
|
|
RAM-TWIST ($20.00)
RAM Twist/Tilt base for M8/M10 threaded holes (will not fit reverse-threaded holes)
|
|
|
|
|
RCB-RC-HON-B+SMALL ($53.45)
RCB-RC-HON-C+SMALL ($55.45)
Replacement Honda reservoir for Gold Wing, Valkyrie, and many other models. Available in black (-B) or Chrome (-C). Includes RAM-SMALL.
|
|
|
|
|
RCB-MG-FJR+SMALL ($83.50)
Base for FJR1300 includes replacement screws for front fuel tank mount, positions RAM ball above fork bridge. Includes RAM-SMALL.
|
|
|
|
|
RCB-MG-R1100GS+SMALL ($108.50)
Base for R1100GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.
|
|
|
|
|
RCB-MG-R1150GS+SMALL ($108.50)
Base for R1150GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.
|
|
|
|
|
RCB-MG-VSTROM+SMALL ($118.50)
Base for VStrom positions RAM ball directly above the speedometer. Includes RAM-SMALL.
|
|
|
|
|
RAM-AMOUNT ($13.00)
Ball with mounting hardware for the A-Mount K1200RS Accessory Dash.
|
|
|
|
|
RCB-CHB-HDW+MIR ($22.00)
Exclusive Handlebar Bolt Base fits any R1100RT/R1150RT/R1200RT and pre-1997 R1100R, and pre-2006 Yamaha FJR1300. Includes RAM-11M.
|
|
|
|
|
RAM-9M ($12.50)
9mm mounting hole w/ offset angle ball, good for mounting under a variety of existing bolts on many bikes
|
|
|
|
|
RAM-11M ($12.00)
11mm mounting hole, good for under Cruiser-style mirrors
|
|
|
|
|
RAM-COMP ($6.00)
RAM-COMP-CH ($26.00)
2-7/16" x 1-5/16" diamond-shaped with two mounting holes. Available in Black or Chrome (CH).
|
|
|
|
|
RAM-STD ($7.00)
2-1/2" Round base with 7 holes for a variety of mounting options
|
|
|
|
|
RAM-SMALL ($8.50)
3/8" x 16 threaded post
|
|
|
|
|
RAM-POST10M ($10.50)
M10 threaded post
|
|
|
|
|
RAM-TINY ($7.00)
1/4" x 20 threaded post
|
|
|
|
|
RAM-SOCK25 ($9.50)
1/4"-20 threaded socket in neck of ball mount
|
|
|
|
|
RAM-SOCK6M ($12.00)
M6 metric threaded socket in neck of ball mount
|
|
|
|
|
RAM-SOCKET ($9.00)
R-A-M ball with #10-24 threaded socket in stem
|
|
|
|
|
RAM-STRAP ($17.50)
V-base with Straps fits 1/2" to 2-1/2" diameter
|
|
|
|
|
RAM-SUCT2+COMP ($16.00)
3.3" Suction Cup w/ Twist-Lock (Automobile glass only - not recommended for motorcycles)
|
|
