RAM Mount System

877-7-GADGET
(877-742-3438)

RAM GPS76 Mount. Installation requires a mounting base, an arm, a Garmin GPS76 Cradle, and a Compact Base / Cradle Ball Adapter. Choose the length of arm and base style that fits your needs. Always ensure that electronic devices used on your motorcycle are securely restrained or tethered. The Garmin GPS76 and GPSMap76 are designed for marine use, but the GPSMap76 also contains road information and is very useful on a motorcycle. The RAM system allows you to quickly move the GPS from car to boat to motorcycle.

Shown with RAM-STDARM and RAM-STD base.

Pricing Information
In order to mount the GPS76 on your motorcycle, you'll need a few different pieces. First, you need the Garmin GPS76 Cradle for $10.50 and a Compact Base / Cradle Ball Adapter for $6.00. Then, you will need an Arm and a Base. For the Arm and Base choices appropriate for your motorcycle, scroll down on this page to see the alternatives. Choose the Arm and Base options to the right, and click the "Add to Cart" button. All of the required components will be added to your shopping cart.

Garmin GPS76 Cradle Mounting Solution

Requires:
(1) Arm
(1) Base (1) Garmin GPS76 Cradle
(1) Compact Base / Cradle Ball Adapter

Fits:
Garmin GPS76/76Map (Black & White screen)

Top:
RAM-GPS76 - GPS76 Cradle ($10.50)
RAM-COMP - Compact Base / Cradle Ball Adapter ($6.00)

Arm:

Note on 3" Chrome: 3" Chrome arm backordered until approx 8/16/2010

Base:

See photos below for descriptions of the base options

The following accessories are also available:

Garmin Hard-Wire Power Cable Garmin Power & Data Cable w/ Bare Wire Ends (for hard-wiring) with in-line fuse	$22.99 Qty: # GA-010-10082-00
R-A-M Magnifier R-A-M Magnifier - attaches to back of R-A-M cradles & provides 2" x 4" lens with 2X magnification on flexible arm	$31.50 Qty: # RAM-MAG

Base Options with R-A-M Kits
Priced as shown above

RAM-BAR ($12.50)
RAM-BAR-CH ($31.00)

U-bolt base for 1/2" to 1-1/4" handlebars. Available in Black or Chrome (CH)

RAM-BAR2 ($20.50)

Double U-bolt base for 3/4" to 1" handlebars. For rough/offroad use.
Backordered until approx 8/16/2010

RAM-HB1 ($12.00)
RAM-HB1-CH ($31.50)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. One R-A-M ball cast in place, 2nd ball available. See RAM-HB2 also. Black or Chrome (CH). Also includes SAE hardware for Harley

RAM-HB-BALL ($11.00)

Add-on ball for RAM-HB1 mount (requires existing RAM-HB1)

RAM-HB2 ($14.00)
RAM-HB2-CH ($38.00)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. Configured with 2 R-A-M balls for use with 2 arms and devices. Black or chrome (-CH), also includes SAE bolts for Harley.

RAM-STEM ($15.00)

Steering stem base for bikes with hollow steering stems 12mm to 28mm diameter

RAM-RC-C ($20.00)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.
Photo is not accurate. This product sits on top of the existing reservoir lid, it does not replace the lid.

RAM-RC-S ($21.00)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.

RAM-BC8 ($10.00)

RAM ball to replace handlebar M8 clamp bolt

RAM-TWIST ($20.00)

RAM Twist/Tilt base for M8/M10 threaded holes (will not fit reverse-threaded holes)

RCB-RC-HON-B+SMALL ($53.45)
RCB-RC-HON-C+SMALL ($55.45)

Replacement Honda reservoir for Gold Wing, Valkyrie, and many other models. Available in black (-B) or Chrome (-C). Includes RAM-SMALL.

RCB-MG-FJR+SMALL ($83.50)

Base for FJR1300 includes replacement screws for front fuel tank mount, positions RAM ball above fork bridge. Includes RAM-SMALL.

RCB-MG-R1100GS+SMALL ($108.50)

Base for R1100GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RCB-MG-R1150GS+SMALL ($108.50)

Base for R1150GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RCB-MG-VSTROM+SMALL ($118.50)

Base for VStrom positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RAM-AMOUNT ($13.00)

Ball with mounting hardware for the A-Mount K1200RS Accessory Dash.

RCB-CHB-HDW+MIR ($22.00)

Exclusive Handlebar Bolt Base fits any R1100RT/R1150RT/R1200RT and pre-1997 R1100R, and pre-2006 Yamaha FJR1300. Includes RAM-11M.

RAM-9M ($12.50)

9mm mounting hole w/ offset angle ball, good for mounting under a variety of existing bolts on many bikes

RAM-11M ($12.00)

11mm mounting hole, good for under Cruiser-style mirrors

RAM-COMP ($6.00)
RAM-COMP-CH ($26.00)

2-7/16" x 1-5/16" diamond-shaped with two mounting holes. Available in Black or Chrome (CH).

RAM-STD ($7.00)

2-1/2" Round base with 7 holes for a variety of mounting options

RAM-SMALL ($8.50)

3/8" x 16 threaded post

RAM-POST10M ($10.50)

M10 threaded post

RAM-TINY ($7.00)

1/4" x 20 threaded post

RAM-SOCK25 ($9.50)

1/4"-20 threaded socket in neck of ball mount

RAM-SOCK6M ($12.00)

M6 metric threaded socket in neck of ball mount

RAM-SOCKET ($9.00)

R-A-M ball with #10-24 threaded socket in stem

RAM-STRAP ($17.50)

V-base with Straps fits 1/2" to 2-1/2" diameter

RAM-SUCT2+COMP ($16.00)

3.3" Suction Cup w/ Twist-Lock (Automobile glass only - not recommended for motorcycles)

You may choose from one of three different lengths of arms in our R-A-M kits, giving you the flexibility of creating a custom solution for your mounting requirements.

Short Arm (1-3/4") (Black or Chrome)
Standard Arm (3") (Black or Chrome)
Long Arm (5-1/4") (Black only)

Make sure you pick up a suction cup for use in the car (see our Bases & Arms page) - a couple of twists of the handle, and you can quickly move devices between your bike and car. Very convenient!