RAM Mount System

877-7-GADGET
(877-742-3438)

RAM Finger Grip Mount. Installation requires a mounting base, an arm, a Finger Grip Universal Holder Holder, and a Compact Base / Cradle Ball Adapter. Choose the length of arm and base style that fits your needs. Always ensure that electronic devices used on your motorcycle are securely restrained or tethered. The Finger Grip universal holder has no moving parts, and is adjustable to hold a variety of small devices. RAM primarily has designed this for the ATV market but some motorcyclists have found uses for the holder. Short, medium, and long Arm Side Clamps are included as described below.

Height Dimensions:
Minimum with Top and Bottom Plates: 5.25"
Maximum with Top and Bottom Plates: 6.0"
The top and bottom plates can be removed for larger devices.

Spine Plate Dimensions:
2.5W x 5.0H"

Using Short Arm Side Clamps
Maximum Depth: 0.75"
Minimum Width: 1.25"
Maximum Width: 3.0"

Using Medium Arm Side Clamps:
Maximum Depth: 1.25"
Minimum Width: 1.5"
Maximum Width: 3.5"

Using Long Arm Side Clamps:
Maximum Depth: 1.6"
Minimum Width: 2.25"
Maximum Width: 3.5"

Pricing Information
In order to mount the Finger Grip on your motorcycle, you'll need a few different pieces. First, you need the Finger Grip Universal Holder Holder for $19.50 and a Compact Base / Cradle Ball Adapter for $6.00. Then, you will need an Arm and a Base. For the Arm and Base choices appropriate for your motorcycle, scroll down on this page to see the alternatives. Choose the Arm and Base options to the right, and click the "Add to Cart" button. All of the required components will be added to your shopping cart.

Finger Grip Universal Holder Holder Mounting Solution

Requires:
(1) Arm
(1) Base (1) Finger Grip Universal Holder Holder
(1) Compact Base / Cradle Ball Adapter

Fits:
Finger Grip Universal Holder

Top:
RAM-FNGR - Finger Grip Holder ($19.50)
RAM-COMP - Compact Base / Cradle Ball Adapter ($6.00)

Arm:

Note on 3" Chrome: 3" Chrome arm backordered until approx 8/16/2010

Base:

See photos below for descriptions of the base options

Base Options with R-A-M Kits
Priced as shown above

RAM-BAR ($12.50)
RAM-BAR-CH ($31.00)

U-bolt base for 1/2" to 1-1/4" handlebars. Available in Black or Chrome (CH)

RAM-BAR2 ($20.50)

Double U-bolt base for 3/4" to 1" handlebars. For rough/offroad use.
Backordered until approx 8/16/2010

RAM-HB1 ($12.00)
RAM-HB1-CH ($31.50)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. One R-A-M ball cast in place, 2nd ball available. See RAM-HB2 also. Black or Chrome (CH). Also includes SAE hardware for Harley

RAM-HB-BALL ($11.00)

Add-on ball for RAM-HB1 mount (requires existing RAM-HB1)

RAM-HB2 ($14.00)
RAM-HB2-CH ($38.00)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. Configured with 2 R-A-M balls for use with 2 arms and devices. Black or chrome (-CH), also includes SAE bolts for Harley.

RAM-STEM ($15.00)

Steering stem base for bikes with hollow steering stems 12mm to 28mm diameter

RAM-RC-C ($20.00)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.
Photo is not accurate. This product sits on top of the existing reservoir lid, it does not replace the lid.

RAM-RC-S ($21.00)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.

RAM-BC8 ($10.00)

RAM ball to replace handlebar M8 clamp bolt

RAM-TWIST ($20.00)

RAM Twist/Tilt base for M8/M10 threaded holes (will not fit reverse-threaded holes)

RCB-RC-HON-B+SMALL ($53.45)
RCB-RC-HON-C+SMALL ($55.45)

Replacement Honda reservoir for Gold Wing, Valkyrie, and many other models. Available in black (-B) or Chrome (-C). Includes RAM-SMALL.

RCB-MG-FJR+SMALL ($83.50)

Base for FJR1300 includes replacement screws for front fuel tank mount, positions RAM ball above fork bridge. Includes RAM-SMALL.

RCB-MG-R1100GS+SMALL ($108.50)

Base for R1100GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RCB-MG-R1150GS+SMALL ($108.50)

Base for R1150GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RCB-MG-VSTROM+SMALL ($118.50)

Base for VStrom positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RAM-AMOUNT ($13.00)

Ball with mounting hardware for the A-Mount K1200RS Accessory Dash.

RCB-CHB-HDW+MIR ($22.00)

Exclusive Handlebar Bolt Base fits any R1100RT/R1150RT/R1200RT and pre-1997 R1100R, and pre-2006 Yamaha FJR1300. Includes RAM-11M.

RAM-9M ($12.50)

9mm mounting hole w/ offset angle ball, good for mounting under a variety of existing bolts on many bikes

RAM-11M ($12.00)

11mm mounting hole, good for under Cruiser-style mirrors

RAM-COMP ($6.00)
RAM-COMP-CH ($26.00)

2-7/16" x 1-5/16" diamond-shaped with two mounting holes. Available in Black or Chrome (CH).

RAM-STD ($7.00)

2-1/2" Round base with 7 holes for a variety of mounting options

RAM-SMALL ($8.50)

3/8" x 16 threaded post

RAM-POST10M ($10.50)

M10 threaded post

RAM-TINY ($7.00)

1/4" x 20 threaded post

RAM-SOCK25 ($9.50)

1/4"-20 threaded socket in neck of ball mount

RAM-SOCK6M ($12.00)

M6 metric threaded socket in neck of ball mount

RAM-SOCKET ($9.00)

R-A-M ball with #10-24 threaded socket in stem

RAM-STRAP ($17.50)

V-base with Straps fits 1/2" to 2-1/2" diameter

RAM-SUCT2+COMP ($16.00)

3.3" Suction Cup w/ Twist-Lock (Automobile glass only - not recommended for motorcycles)

You may choose from one of three different lengths of arms in our R-A-M kits, giving you the flexibility of creating a custom solution for your mounting requirements.

Short Arm (1-3/4") (Black or Chrome)
Standard Arm (3") (Black or Chrome)
Long Arm (5-1/4") (Black only)

Make sure you pick up a suction cup for use in the car (see our Bases & Arms page) - a couple of twists of the handle, and you can quickly move devices between your bike and car. Very convenient!