[Choose] RAM-BAR ($13.00)
[Choose] RAM-BAR-CH ($31.00)

U-bolt base for 1/2" to 1-1/4" handlebars. Available in Black or Chrome (CH)

[Choose] RAM-BAR2 ($21.00)

Double U-bolt base for 3/4" to 1" handlebars. For rough/offroad use.

[Choose] RAM-HB1 ($11.00)
[Choose] RAM-HB1-CH ($33.50)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. One R-A-M ball cast in place, 2nd ball available. See RAM-HB2 also. Black or Chrome (CH). Also includes SAE hardware for Harley

[Choose] RAM-HB-BALL ($11.00)

Add-on ball for RAM-HB1 mount (requires existing RAM-HB1)

[Choose] RAM-HB2 ($14.50)
[Choose] RAM-HB2-CH ($38.00)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. Configured with 2 R-A-M balls for use with 2 arms and devices. Black or chrome (-CH), also includes SAE bolts for Harley.

[Choose] RAM-STEM ($16.00)

Steering stem base for bikes with hollow steering stems 12mm to 28mm diameter

[Choose] RAM-RC-C ($20.00)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.
Photo is not accurate. This product sits on top of the existing reservoir lid, it does not replace the lid.

[Choose] RAM-RC-S ($22.00)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.

[Choose] RAM-RC-S+M5 ($24.00)

Includes hardware & instructions to fit BMW R1100/K1100 rectangular brake reservoir lid

[Choose] RAM-BC8 ($10.50)

RAM ball to replace handlebar M8 clamp bolt

[Choose] RAM-TWIST ($20.00)

RAM Twist/Tilt base for M8/M10 threaded holes (will not fit reverse-threaded holes)

[Choose] RCB-RC-HON-B+SMALL ($53.45)
[Choose] RCB-RC-HON-C+SMALL ($53.45)

Replacement Honda reservoir for Gold Wing, Valkyrie, and many other models. Available in black (-B) or Chrome (-C). Includes RAM-SMALL.

[Choose] RCB-MG-FJR+SMALL ($83.50)

Base for FJR1300 includes replacement screws for front fuel tank mount, positions RAM ball above fork bridge. Includes RAM-SMALL.

[Choose] RCB-MG-R1100GS+SMALL ($108.50)

Base for R1100GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.

[Choose] RCB-MG-VSTROM+SMALL ($118.50)

Base for VStrom positions RAM ball directly above the speedometer. Includes RAM-SMALL.

[Choose] RAM-AMOUNT ($13.00)

Ball with mounting hardware for the A-Mount K1200RS Accessory Dash.

[Choose] RCB-CHB-HDW+MIR ($22.00)

Exclusive Handlebar Bolt Base fits any R1100RT/R1150RT/R1200RT and pre-1997 R1100R, and pre-2006 Yamaha FJR1300. Includes RAM-11M.

[Choose] RAM-9M ($12.50)

9mm mounting hole w/ offset angle ball, good for mounting under a variety of existing bolts on many bikes

[Choose] RAM-11M ($12.00)

11mm mounting hole, good for under Cruiser-style mirrors

[Choose] RAM-COMP ($6.50)
[Choose] RAM-COMP-CH ($26.50)

2-7/16" x 1-5/16" diamond-shaped with two mounting holes. Available in Black or Chrome (CH).

[Choose] RAM-STD ($7.00)

2-1/2" Round base with 7 holes for a variety of mounting options

[Choose] RAM-AMPS ($6.50)

2" x 1.7" plate with AMPS hole spacing

[Choose] RAM-SMALL ($8.50)

3/8" x 16 threaded post

[Choose] RAM-POST10M ($10.50)

M10 threaded post

[Choose] RAM-TINY ($7.00)

1/4" x 20 threaded post

[Choose] RAM-SOCK25 ($9.50)

1/4"-20 threaded socket in neck of ball mount

[Choose] RAM-SOCK6M ($12.00)

M6 metric threaded socket in neck of ball mount

[Choose] RAM-SOCKET ($9.00)

R-A-M ball with #10-24 threaded socket in stem

[Choose] RAM-STRAP ($17.50)

V-base with Straps fits 1/2" to 2-1/2" diameter

[Choose] RAM-SUCT2+COMP ($17.00)

3.3" Suction Cup w/ Twist-Lock (Automobile glass only - not recommended for motorcycles)