RAM Mount System

877-7-GADGET

(877-742-3438)

We accept Visa, MasterCard, American Express, and Discover

CycleGadgets.com is intended to render properly in the current versions of Internet Explorer, Chrome, Safari, and Firefox.

RAM Nuvi 200-series Mount. Installation requires a mounting base, an arm, a Garmin Nuvi 2series GPS Cradle, and a Compact Base / Cradle Ball Adapter. Choose the length of arm and base style that fits your needs. Always ensure that electronic devices used on your motorcycle are securely restrained or tethered.

Shown with cradle ball adapter

Pricing Information
In order to mount the Nuvi 200-series on your motorcycle, you'll need a few different pieces.

First, you need the RAM-NUV2 Cradle ($8.50) and a RAM-COMP ball adapter ($6.50). Then, you will need an Arm and a Base. For the Arm and Base choices appropriate for your motorcycle, scroll down on this page to see the alternatives.

Choose the Arm and Base options to the right, and click the "Add to Cart" button. All of the required components will be added to your shopping cart.

Garmin Nuvi 2series GPS Cradle Mounting Solution

Requires:

(1) Arm
(1) Base

(1) Garmin Nuvi 2series GPS Cradle
(1) Compact Base / Cradle Ball Adapter

Fits:

Garmin Nuvi 200-series GPS

Top:	RAM-NUV2 - Nuvi 200-series Cradle ($8.50) Note: This cradle fits the Garmin Nuvi 2xx-series, e.g. the Nuvi 205 or Nuvi 265. It does not fit the W series, e.g. 205W or 265W. We have a different cradle for 200W-series models. RAM-COMP - Compact Base / Cradle Ball Adapter ($6.50)
Arm:
Base:	See photos below for descriptions of the base options

The following accessories are also available:

Hardwire Mini USB Power Supply (e.g. Garmin Nuvi) Hardwire Mini USB Power Supply. 12-24V DC input, 5V DC 1500MA output. Powers many devices that have mini-USB type jack, including most Garmin Nuvi series GPS receivers.	$27.95 Qty: # CG-USB-HW
GlareStomper GPS sun shade model 316 Sun shade and fold-down screen cover fits GPS receivers with a case width of less than 4.5" wide	$17.95 Qty: # GST-316
R-A-M Magnifier R-A-M Magnifier - attaches to back of R-A-M cradles & provides 2" x 4" lens with 2X magnification on flexible arm	$32.00 Qty: # RAM-MAG

*Free shipping on items marked "Free Shipping" above. Valid to United States residents only. Items under 14oz weight will be shipped 1st class mail. If ordered with other merchandise, the item will be included with the rest of your order, and will not affect the shipping charge of that order. International orders will have Air Mail charges added at time of shipment.

Base Options with R-A-M Kits
Priced as shown above

[Choose] RAM-BAR ($13.00)
[Choose] RAM-BAR-CH ($31.00)

U-bolt base for 1/2" to 1-1/4" handlebars. Available in Black or Chrome (CH)

[Choose] RAM-BAR2 ($21.00)

Double U-bolt base for 3/4" to 1" handlebars. For rough/offroad use.

[Choose] RAM-HB1 ($11.00)
[Choose] RAM-HB1-CH ($33.50)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. One R-A-M ball cast in place, 2nd ball available. See RAM-HB2 also. Black or Chrome (CH). Also includes SAE hardware for Harley

[Choose] RAM-HB-BALL ($11.00)

Add-on ball for RAM-HB1 mount (requires existing RAM-HB1)

[Choose] RAM-HB2 ($14.50)
[Choose] RAM-HB2-CH ($38.00)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. Configured with 2 R-A-M balls for use with 2 arms and devices. Black or chrome (-CH), also includes SAE bolts for Harley.

[Choose] RAM-STEM ($16.00)

Steering stem base for bikes with hollow steering stems 12mm to 28mm diameter

[Choose] RAM-RC-C ($20.00)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.
Photo is not accurate. This product sits on top of the existing reservoir lid, it does not replace the lid.

[Choose] RAM-RC-S ($22.00)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.

[Choose] RAM-RC-S+M5 ($24.00)

Includes hardware & instructions to fit BMW R1100/K1100 rectangular brake reservoir lid

[Choose] RAM-BC8 ($10.50)

RAM ball to replace handlebar M8 clamp bolt

[Choose] RAM-TWIST ($20.00)

RAM Twist/Tilt base for M8/M10 threaded holes (will not fit reverse-threaded holes)

[Choose] RCB-RC-HON-B+SMALL ($53.45)
[Choose] RCB-RC-HON-C+SMALL ($53.45)

Replacement Honda reservoir for Gold Wing, Valkyrie, and many other models. Available in black (-B) or Chrome (-C). Includes RAM-SMALL.

[Choose] RCB-MG-FJR+SMALL ($83.50)

Base for FJR1300 includes replacement screws for front fuel tank mount, positions RAM ball above fork bridge. Includes RAM-SMALL.

[Choose] RCB-MG-R1100GS+SMALL ($108.50)

Base for R1100GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.

[Choose] RCB-MG-VSTROM+SMALL ($118.50)

Base for VStrom positions RAM ball directly above the speedometer. Includes RAM-SMALL.

[Choose] RAM-AMOUNT ($13.00)

Ball with mounting hardware for the A-Mount K1200RS Accessory Dash.

[Choose] RCB-CHB-HDW+MIR ($22.00)

Exclusive Handlebar Bolt Base fits any R1100RT/R1150RT/R1200RT and pre-1997 R1100R, and pre-2006 Yamaha FJR1300. Includes RAM-11M.

[Choose] RAM-9M ($12.50)

9mm mounting hole w/ offset angle ball, good for mounting under a variety of existing bolts on many bikes

[Choose] RAM-11M ($12.00)

11mm mounting hole, good for under Cruiser-style mirrors

[Choose] RAM-COMP ($6.50)
[Choose] RAM-COMP-CH ($26.50)

2-7/16" x 1-5/16" diamond-shaped with two mounting holes. Available in Black or Chrome (CH).

[Choose] RAM-STD ($7.00)

2-1/2" Round base with 7 holes for a variety of mounting options

[Choose] RAM-AMPS ($6.50)

2" x 1.7" plate with AMPS hole spacing

[Choose] RAM-SMALL ($8.50)

3/8" x 16 threaded post

[Choose] RAM-POST10M ($10.50)

M10 threaded post

[Choose] RAM-TINY ($7.00)

1/4" x 20 threaded post

[Choose] RAM-SOCK25 ($9.50)

1/4"-20 threaded socket in neck of ball mount

[Choose] RAM-SOCK6M ($12.00)

M6 metric threaded socket in neck of ball mount

[Choose] RAM-SOCKET ($9.00)

R-A-M ball with #10-24 threaded socket in stem

[Choose] RAM-STRAP ($17.50)

V-base with Straps fits 1/2" to 2-1/2" diameter

[Choose] RAM-SUCT2+COMP ($17.00)

3.3" Suction Cup w/ Twist-Lock (Automobile glass only - not recommended for motorcycles)

You may choose from one of three different lengths of arms in our R-A-M kits, giving you the flexibility of creating a custom solution for your mounting requirements.

Short Arm (1-3/4") (Black or Chrome)
Standard Arm (3") (Black or Chrome)
Long Arm (5-1/4") (Black only)

Make sure you pick up a suction cup for use in the car (see our Bases & Arms page) - a couple of twists of the handle, and you can quickly move devices between your bike and car. Very convenient!