RAM Mount System

877-7-GADGET

(877-742-3438)

We accept Visa, MasterCard, American Express, and Discover

RAM Otterbox Mount. Installation requires a mounting base, an arm, a Otterbox Holder, and a Compact Base / Cradle Ball Adapter. Choose the length of arm and base style that fits your needs. Always ensure that electronic devices used on your motorcycle are securely restrained or tethered. There is a product called "Otterbox" which is a waterproof case to fit PDA's and other portable electronic devices. We've been getting questions about how to mount these to bikes for a couple of years, and finally RAM has a solution. The Otterbox clips right onto this adapter plate. CycleGadgets does not sell the Otterbox itself.

Otterbox not included. Does not fit all Otterbox products, visually verify that your Otterbox is a match before ordering.

Pricing Information
In order to mount the Otterbox on your motorcycle, you'll need a few different pieces.

First, you need the RAM-OTTER Holder ($6.00) and a RAM-COMP ball adapter ($6.50). Then, you will need an Arm and a Base. For the Arm and Base choices appropriate for your motorcycle, scroll down on this page to see the alternatives.

Choose the Arm and Base options to the right, and click the "Add to Cart" button. All of the required components will be added to your shopping cart.

Otterbox Holder Mounting Solution

Requires:

(1) Arm
(1) Base

(1) Otterbox Holder
(1) Compact Base / Cradle Ball Adapter

Fits:

Otterboxes with quick-release clip on back

Top:	RAM-OTTER - Otterbox Holder ($6.00) Note: This product fits only those Otterbox cases that have a slide-on socket such as the one pictured. If your Otterbox case doesn't have the slide-on socket, this won't work for you. RAM-COMP - Compact Base / Cradle Ball Adapter ($6.50)
Arm:
Base:	See photos below for descriptions of the base options

Base Options with R-A-M Kits
Priced as shown above

RAM-BAR ($13.00)
RAM-BAR-CH ($31.00)

U-bolt base for 1/2" to 1-1/4" handlebars. Available in Black or Chrome (CH)

RAM-BAR2 ($21.00)

Double U-bolt base for 3/4" to 1" handlebars. For rough/offroad use.

RAM-HB1 ($11.00)
RAM-HB1-CH ($33.50)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. One R-A-M ball cast in place, 2nd ball available. See RAM-HB2 also. Black or Chrome (CH). Also includes SAE hardware for Harley

RAM-HB-BALL ($11.00)

Add-on ball for RAM-HB1 mount (requires existing RAM-HB1)

RAM-HB2 ($14.50)
RAM-HB2-CH ($38.00)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. Configured with 2 R-A-M balls for use with 2 arms and devices. Black or chrome (-CH), also includes SAE bolts for Harley.

RAM-STEM ($16.00)

Steering stem base for bikes with hollow steering stems 12mm to 28mm diameter

RAM-RC-C ($20.00)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.
Photo is not accurate. This product sits on top of the existing reservoir lid, it does not replace the lid.

RAM-RC-S ($22.00)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.

RAM-RC-S+M5 ($24.00)

Includes hardware & instructions to fit BMW R1100/K1100 rectangular brake reservoir lid

RAM-BC8 ($10.50)

RAM ball to replace handlebar M8 clamp bolt

RAM-TWIST ($20.00)

RAM Twist/Tilt base for M8/M10 threaded holes (will not fit reverse-threaded holes)

RCB-RC-HON-B+SMALL ($53.45)
RCB-RC-HON-C+SMALL ($53.45)

Replacement Honda reservoir for Gold Wing, Valkyrie, and many other models. Available in black (-B) or Chrome (-C). Includes RAM-SMALL.

RCB-MG-FJR+SMALL ($83.50)

Base for FJR1300 includes replacement screws for front fuel tank mount, positions RAM ball above fork bridge. Includes RAM-SMALL.

RCB-MG-R1100GS+SMALL ($108.50)

Base for R1100GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RCB-MG-VSTROM+SMALL ($118.50)

Base for VStrom positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RAM-AMOUNT ($13.00)

Ball with mounting hardware for the A-Mount K1200RS Accessory Dash.

RCB-CHB-HDW+MIR ($22.00)

Exclusive Handlebar Bolt Base fits any R1100RT/R1150RT/R1200RT and pre-1997 R1100R, and pre-2006 Yamaha FJR1300. Includes RAM-11M.

RAM-9M ($12.50)

9mm mounting hole w/ offset angle ball, good for mounting under a variety of existing bolts on many bikes

RAM-11M ($12.00)

11mm mounting hole, good for under Cruiser-style mirrors

RAM-COMP ($6.50)
RAM-COMP-CH ($26.50)

2-7/16" x 1-5/16" diamond-shaped with two mounting holes. Available in Black or Chrome (CH).

RAM-STD ($7.00)

2-1/2" Round base with 7 holes for a variety of mounting options

RAM-AMPS ($6.50)

2" x 1.7" plate with AMPS hole spacing

RAM-SMALL ($8.50)

3/8" x 16 threaded post

RAM-POST10M ($10.50)

M10 threaded post

RAM-TINY ($7.00)

1/4" x 20 threaded post

RAM-SOCK25 ($9.50)

1/4"-20 threaded socket in neck of ball mount

RAM-SOCK6M ($12.00)

M6 metric threaded socket in neck of ball mount

RAM-SOCKET ($9.00)

R-A-M ball with #10-24 threaded socket in stem

RAM-STRAP ($17.50)

V-base with Straps fits 1/2" to 2-1/2" diameter

RAM-SUCT2+COMP ($17.00)

3.3" Suction Cup w/ Twist-Lock (Automobile glass only - not recommended for motorcycles)

You may choose from one of three different lengths of arms in our R-A-M kits, giving you the flexibility of creating a custom solution for your mounting requirements.

Short Arm (1-3/4") (Black or Chrome)
Standard Arm (3") (Black or Chrome)
Long Arm (5-1/4") (Black only)

Make sure you pick up a suction cup for use in the car (see our Bases & Arms page) - a couple of twists of the handle, and you can quickly move devices between your bike and car. Very convenient!