RAM Mount System

877-7-GADGET
(877-742-3438)

RAM Satellite Radio Mount. Installation requires a mounting base, an arm, and the Delphi XM Radio or Sirius Streamer GT RAM Ball. Choose the length of arm and base style that fits your needs. Shown with RAM-STD base. Always ensure that electronic devices used on your motorcycle are securely restrained or tethered. Our R-A-M Delphi kit includes a base that bolts to the back of the Delphi SkyFi Vehicle Adapter Kit Cradle, Delphi Roady/Roady2 clip, or MyFi vehicle cradle, or the Sirius Streamer GT mounting plate..

Pricing Information
In order to mount the Satellite Radio on your motorcycle, you'll need a few different pieces. First, you need the Delphi XM Radio or Sirius Streamer GT RAM Ball for $9.50. Then, you will need an Arm and a Base. For the Arm and Base choices appropriate for your motorcycle, scroll down on this page to see the alternatives. Choose the Arm and Base options to the right, and click the "Add to Cart" button. All of the required components will be added to your shopping cart.

Delphi XM Radio or Sirius Streamer GT RAM Ball Mounting Solution

Requires:
(1) Arm
(1) Base (1) Delphi XM Radio or Sirius Streamer GT RAM Ball

Fits:
Delphi XM Radio (including SkyFi, Roady, and MyFi radios)

Top:
Satellite Radio RAM Ball ($9.50)

Arm:

Base:

Note on Item #RCB-MG-R1200RT+SMALL: Out of stock until the next batch, mid-December.
See photos below for descriptions of the base options

The following accessories are also available:

RAM Satellite Radio Antenna Bracket fits between several popular satellite radios (Including Delphi SkyFi, SkyFi2, Roady, Roady2, and Sirius Streamer GT) and the mount being used (e.g. RAM or Tech Mount). Carbon steel plate holds the magnetic satellite antenna securely, and a tough polyurethane powder coating prevents corrosion. This bracket works with many Sirius radios including the Sportster 4 and Starmate 4. The satellite antenna needs a clear line of sight, so this bracket works best if the radio is mounted high on the handlebars. Lower mounting locations may not work as well as your body can block the satellite signal.	$6.00 Qty: # RAM-SRBRK
CycleGadgets Satellite Radio Covers - clear plastic front, black vinyl sides, elastic drawstring with clip. Protects against light rain, not intended for unfaired bikes or in heavy rain. *Choose Version:*	Qty:
Flush Plate adapter for Delphi Roady XT, MyFi vehicle cradles. Allows these radios to be used with AMPS 4-hole mounts.	$5.00 Qty: # XF-FP

*Free shipping on items marked "Free Shipping" above. Valid to United States residents only. Item will be shipped 1st class mail. If ordered with other merchandise, the item will be included with the rest of your order, and will not affect the shipping charge of that order. International orders will have Air Mail charges added at time of shipment.

Base Options with R-A-M Kits
Priced as shown above

RAM-BAR ($12.00)
RAM-BAR-CH ($29.50)

U-bolt base for 1/2" to 1-1/4" handlebars. Available in Black or Chrome (CH)

RAM-BAR2 ($18.00)

Double U-bolt base for 3/4" to 1" handlebars. For rough/offroad use.

RAM-HB1 ($12.00)
RAM-HB1-CH ($31.00)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. One R-A-M ball cast in place, 2nd ball available. See RAM-HB2 also. Black or Chrome (CH). Also includes SAE hardware for Harley

RAM-HB-BALL ($11.00)

Add-on ball for RAM-HB1 mount (requires existing RAM-HB1)

RAM-HB2 ($13.50)
RAM-HB2-CH ($37.50)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. Configured with 2 R-A-M balls for use with 2 arms and devices. Black or chrome (-CH), also includes SAE bolts for Harley.

RAM-STEM ($14.50)

Steering stem base for bikes with hollow steering stems 12mm to 28mm diameter

RAM-RC-C ($18.50)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.

RAM-RC-S ($19.50)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.

RAM-BC8 ($10.00)

RAM ball to replace handlebar M8 clamp bolt

RAM-TWIST ($19.00)

RAM Twist/Tilt base for M8/M10 threaded holes (will not fit reverse-threaded holes)

RCB-RC-HON-B+SMALL ($53.45)
RCB-RC-HON-C+SMALL ($53.45)

Replacement Honda reservoir for Gold Wing, Valkyrie, and many other models. Available in black (-B) or Chrome (-C). Includes RAM-SMALL.

RCB-MG-FJR+SMALL ($83.50)

Base for FJR1300 includes replacement screws for front fuel tank mount, positions RAM ball above fork bridge. Includes RAM-SMALL.

RCB-MG-R1100GS+SMALL ($108.50)

Base for R1100GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RCB-MG-R1150GS+SMALL ($108.50)

Base for R1150GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RCB-MG-R1150RT+SMALL ($113.50)

Base for R1150RT positions RAM ball directly above the instruments. Includes one RAM-SMALL. Can support up to (3) RAM-SMALL bases.

RCB-MG-R1200GS+SMALL ($123.50)

Base for R1200GS positions RAM ball directly above the instruments. Includes one RAM-SMALL. Can support up to (3) RAM-SMALL bases.

RCB-MG-R1200GS-08+SMALL ($123.50)

Base for R1200GS positions RAM ball directly above the instruments. Includes one RAM-SMALL. Can support up to (3) RAM-SMALL bases.

RCB-MG-R1200RT+SMALL ($158.50)

Base for R1200RT positions RAM ball directly above the instruments. Includes one RAM-SMALL. Can support up to (3) RAM-SMALL bases.
Out of stock until the next batch, mid-December.

RCB-MG-VSTROM+SMALL ($118.50)

Base for VStrom positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RCB-MG-ST1300+SMALL ($148.50)

Base for ST1300 positions RAM ball on top of the dashboard. Includes one RAM-SMALL. Can support up to (3) RAM-SMALL bases.

RCB-CHB-HDW+MIR ($22.00)

Exclusive Handlebar Bolt Base fits any R1100RT/R1150RT/R1200RT and pre-1997 R1100R, and pre-2006 Yamaha FJR1300. Includes RAM-11M.

RAM-9M ($12.50)

9mm mounting hole w/ offset angle ball, good for mounting under a variety of existing bolts on many bikes

RAM-11M ($12.00)

11mm mounting hole, good for under Cruiser-style mirrors

RAM-COMP ($6.00)
RAM-COMP-CH ($25.50)

2-7/16" x 1-5/16" diamond-shaped with two mounting holes. Available in Black or Chrome (CH).

RAM-STD ($7.00)

2-1/2" Round base with 7 holes for a variety of mounting options

RAM-SMALL ($8.50)

3/8" x 16 threaded post

RAM-TINY ($8.00)

1/4" x 20 threaded post

RAM-SOCK25 ($9.50)

1/4"-20 threaded socket in neck of ball mount

RAM-SOCK6M ($12.00)

M6 metric threaded socket in neck of ball mount

RAM-SOCKET ($9.00)

R-A-M ball with #10-24 threaded socket in stem

RAM-STRAP ($16.50)

V-base with Straps fits 1/2" to 2-1/2" diameter

RAM-SUCT2+COMP ($15.50)

3.3" Suction Cup w/ Twist-Lock (Automobile glass only - not recommended for motorcycles)

You may choose from one of three different lengths of arms in our R-A-M kits, giving you the flexibility of creating a custom solution for your mounting requirements.

Short Arm (1-3/4") (Black or Chrome)
Standard Arm (3") (Black or Chrome)
Long Arm (5-1/4") (Black only)

Make sure you pick up a suction cup for use in the car (see our Bases & Arms page) - a couple of twists of the handle, and you can quickly move devices between your bike and car. Very convenient!