RAM Mount System

877-7-GADGET
(877-742-3438)

RAM AquaBox 6 Mount. Installation requires a mounting base, an arm, a RAM Aqua Box 6 (6" x 4" x 1-3/4") Case, and a Standard Base. Choose the length of arm and base style that fits your needs. Shown with RAM-BAR base. Padlock not included. Always ensure that electronic devices used on your motorcycle are securely restrained or tethered. The watertight AquaBox 6 is designed to protect electronic devices from rain. It has a flexible clear membrane front, which allows operation of buttons on the device inside the case. The internal dimensions are 6" x 4" x 1.75", and it includes foam pads of various thickness to ensure that the device is held close to the membrane so that buttons can be used. A pass-through port on the back allows cables with plugs of up to 1" size to come out of the case. This case will fit many popular GPS receivers including the TomTom 720, Garmin Nuvi 700-series, and Magellan Maestro 4000-series.

Pricing Information
In order to mount the AquaBox 6 on your motorcycle, you'll need a few different pieces. First, you need the RAM Aqua Box 6 (6" x 4" x 1-3/4") Case for $48.00 and a Standard Base for $7.00. Then, you will need an Arm and a Base. For the Arm and Base choices appropriate for your motorcycle, scroll down on this page to see the alternatives. Choose the Arm and Base options to the right, and click the "Add to Cart" button. All of the required components will be added to your shopping cart.

RAM Aqua Box 6 (6" x 4" x 1-3/4") Case Mounting Solution

Requires:
(1) Arm
(1) Base (1) RAM Aqua Box 6 (6" x 4" x 1-3/4") Case
(1) Standard Base

Fits:
Electronic devices up to 6" x 4" x 1.75"

Top:
AquaBox 6 Case ($48.00)
Standard Base ($7.00)

Arm:

Base:

Note on Item #RCB-MG-R1200RT+SMALL: Out of stock until the next batch, mid-December.
See photos below for descriptions of the base options

Base Options with R-A-M Kits
Priced as shown above

RAM-BAR ($12.00)
RAM-BAR-CH ($29.50)

U-bolt base for 1/2" to 1-1/4" handlebars. Available in Black or Chrome (CH)

RAM-BAR2 ($18.00)

Double U-bolt base for 3/4" to 1" handlebars. For rough/offroad use.

RAM-HB1 ($12.00)
RAM-HB1-CH ($31.00)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. One R-A-M ball cast in place, 2nd ball available. See RAM-HB2 also. Black or Chrome (CH). Also includes SAE hardware for Harley

RAM-HB-BALL ($11.00)

Add-on ball for RAM-HB1 mount (requires existing RAM-HB1)

RAM-HB2 ($13.50)
RAM-HB2-CH ($37.50)

Handlebar Assembly mount for clutch/brake reservoir on Gold Wing and many other bikes. Configured with 2 R-A-M balls for use with 2 arms and devices. Black or chrome (-CH), also includes SAE bolts for Harley.

RAM-STEM ($14.50)

Steering stem base for bikes with hollow steering stems 12mm to 28mm diameter

RAM-RC-C ($18.50)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.

RAM-RC-S ($19.50)

Reservoir cover RAM ball fits a variety of Japanese and BMW motorcycles.

RAM-BC8 ($10.00)

RAM ball to replace handlebar M8 clamp bolt

RAM-TWIST ($19.00)

RAM Twist/Tilt base for M8/M10 threaded holes (will not fit reverse-threaded holes)

RCB-RC-HON-B+SMALL ($53.45)
RCB-RC-HON-C+SMALL ($53.45)

Replacement Honda reservoir for Gold Wing, Valkyrie, and many other models. Available in black (-B) or Chrome (-C). Includes RAM-SMALL.

RCB-MG-FJR+SMALL ($83.50)

Base for FJR1300 includes replacement screws for front fuel tank mount, positions RAM ball above fork bridge. Includes RAM-SMALL.

RCB-MG-R1100GS+SMALL ($108.50)

Base for R1100GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RCB-MG-R1150GS+SMALL ($108.50)

Base for R1150GS positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RCB-MG-R1150RT+SMALL ($113.50)

Base for R1150RT positions RAM ball directly above the instruments. Includes one RAM-SMALL. Can support up to (3) RAM-SMALL bases.

RCB-MG-R1200GS+SMALL ($123.50)

Base for R1200GS positions RAM ball directly above the instruments. Includes one RAM-SMALL. Can support up to (3) RAM-SMALL bases.

RCB-MG-R1200GS-08+SMALL ($123.50)

Base for R1200GS positions RAM ball directly above the instruments. Includes one RAM-SMALL. Can support up to (3) RAM-SMALL bases.

RCB-MG-R1200RT+SMALL ($158.50)

Base for R1200RT positions RAM ball directly above the instruments. Includes one RAM-SMALL. Can support up to (3) RAM-SMALL bases.
Out of stock until the next batch, mid-December.

RCB-MG-VSTROM+SMALL ($118.50)

Base for VStrom positions RAM ball directly above the speedometer. Includes RAM-SMALL.

RCB-MG-ST1300+SMALL ($148.50)

Base for ST1300 positions RAM ball on top of the dashboard. Includes one RAM-SMALL. Can support up to (3) RAM-SMALL bases.

RCB-CHB-HDW+MIR ($22.00)

Exclusive Handlebar Bolt Base fits any R1100RT/R1150RT/R1200RT and pre-1997 R1100R, and pre-2006 Yamaha FJR1300. Includes RAM-11M.

RAM-9M ($12.50)

9mm mounting hole w/ offset angle ball, good for mounting under a variety of existing bolts on many bikes

RAM-11M ($12.00)

11mm mounting hole, good for under Cruiser-style mirrors

RAM-COMP ($6.00)
RAM-COMP-CH ($25.50)

2-7/16" x 1-5/16" diamond-shaped with two mounting holes. Available in Black or Chrome (CH).

RAM-STD ($7.00)

2-1/2" Round base with 7 holes for a variety of mounting options

RAM-SMALL ($8.50)

3/8" x 16 threaded post

RAM-TINY ($8.00)

1/4" x 20 threaded post

RAM-SOCK25 ($9.50)

1/4"-20 threaded socket in neck of ball mount

RAM-SOCK6M ($12.00)

M6 metric threaded socket in neck of ball mount

RAM-SOCKET ($9.00)

R-A-M ball with #10-24 threaded socket in stem

RAM-STRAP ($16.50)

V-base with Straps fits 1/2" to 2-1/2" diameter

RAM-SUCT2+COMP ($15.50)

3.3" Suction Cup w/ Twist-Lock (Automobile glass only - not recommended for motorcycles)

You may choose from one of three different lengths of arms in our R-A-M kits, giving you the flexibility of creating a custom solution for your mounting requirements.

Short Arm (1-3/4") (Black or Chrome)
Standard Arm (3") (Black or Chrome)
Long Arm (5-1/4") (Black only)

Make sure you pick up a suction cup for use in the car (see our Bases & Arms page) - a couple of twists of the handle, and you can quickly move devices between your bike and car. Very convenient!